Product Introduction
Vacuum Chamber (Body Frame®) is a movable vacuum chamber.
Since the height can be changed while maintaining the vacuum, it has the most achievements applied to press machines.
It's easy to use, just attach the Vacuum Chamber (Body Frame®) to the press.
This alone realizes a vacuum forming environment.
Vacuum pressing is possible even with existing equipment.
Vacuum pressing is also possible with a desktop press.
Since the height can be changed while maintaining the vacuum, it has the most achievements applied to press machines.
It's easy to use, just attach the Vacuum Chamber (Body Frame®) to the press.
This alone realizes a vacuum forming environment.
Vacuum pressing is possible even with existing equipment.
Vacuum pressing is also possible with a desktop press.
Features
Realizing a vacuum heating environment at low cost
A vacuum forming environment can be realized at low cost by diverting or diverting an existing press machine. It can be installed at about 1/20 the cost of the Gantry hydraulic press machine.Basically, the press machine does not need to be modified.
Reliable airtightness (130Pa)
Adopting lip type packing with good followability ensures reliable airtightness. Achieves a vacuum of 130 Pa or less. Prevents poor oxidation of products, achieves high quality, and improves yield.
Overwhelming short tact
Since a vacuum chamber is formed near the work, there is no waste in the vacuum chamber, the target vacuum degree is reached instantly, and it is quickly released to the atmosphere. Eliminates the long waiting times that are common with Gantry hydraulic press machines.High work efficiency is suitable for high-mix low-volume production.
Internal temperature and vacuum degree can be measured
With abundant options, it is possible to measure the temperature and pressure inside the chamber. Supports severe temperature control and pressure control. Ideal for setting conditions for research and trial production.
Product Specifications
Reachable Vacuum Level | 130Pa or less |
Compatible press machine | □ 120mm ～ □ 1800mm |
Molding height dimensions | 22mm ~ 240mm |
Range of movement | 5mm ~ 50mm |
Eur-lex.europa.eu eur-lex.europa.eu | 260 ℃ |
Material | A5052, etc. |
Options | Temperature measurement (thermocouple + dedicated bushing) Vacuum degree measurement (vacuum gauge + dedicated bushing) Moving part protective cover |
Vacuum Chamber (Body Frame ®) usage example
Manufacture of multi-layer printed wiring boards and flexible printed wiring boards
Suitable for test sample production with a tabletop press and high-mix, small-lot production with a single-stage press.
Manufacture of multilayer capacitors
Residual gas between layers generated during high-density thin film lamination is expelled by vacuum to realize higher-density thin film lamination.
Rubber / resin molding / resin molding
The gas generated during the heating press is removed by vacuum to improve the yield. It is effective not only for heat pressing but also for measures against difficult-to-mold products of injection molding machines, as well as measures against discoloration during molding.
Research and Development
Since a sealed space can be easily secured, it can be used for research and development in a vacuum atmosphere or an inert gas atmosphere, and for setting conditions for product trials. It can also be used under high temperature conditions up to 260 ° C. Since it can be completely blocked from the outside air, it is necessary to secure an atmosphere that dislikes the inclusion of impurities.
Attached to an existing press machine
Simply attach the Vacuum Chamber (Body Frame®) to your press and it will quickly turn into a vacuum press. By adopting Vacuum Chamber (Body Frame ®), vacuum press is realized at 1/20 cost compared to Gantry hydraulic press machine.The manufacturer of the existing press machine does not matter.
